Screw Down Metal Roofing Panels in Georgia: Tough, Affordable, and Time-Tested

Looking for a long-lasting roof without the high price tag? Screw down metal panels—also known as exposed fastener panels—are one of the most popular and cost-effective roofing options in Georgia.

At Roof Nuts GA, we install screw down panels for homes, barns, garages, and additions across Atlanta, Macon, Savannah, Columbus, and Augusta. These roofs are simple, strong, and made to handle Georgia’s wind, rain, and sun.

What Are Screw Down Panels?

Screw down panels are metal sheets that are secured directly to the roof deck using visible fasteners. These panels come in long sections—usually 26 or 29-gauge steel—and are often coated in weather-resistant finishes like Galvalume® or Kynar 500®.

Also called:

• Exposed fastener panels

• R-panel or PBR panel

• Corrugated panels (in some cases)

This system is straightforward to install and ideal for structures where value and strength matter.

Why Georgia Homeowners Choose Screw Down Metal Roofing

Screw down panels are widely used throughout Georgia for a few key reasons:

✅ Advantages:

• Affordable upfront cost

• Lasts 25–40 years with proper installation

• Quick install time

• Stands up to storms, hail, and high winds

• Ideal for homes, sheds, barns, and garages

• Available in many colors and profiles

We use upgraded fasteners with neoprene washers to prevent leaks, and seal all edges and transitions to handle heavy Georgia rain.

Ideal Applications

Screw down panels work well for:

• Single-family homes (especially ranch-style)

• Metal roofing over shingles (when code-compliant)

• Workshops and garages

• Barns and agricultural buildings

• Porches, lean-tos, and awnings

For more complex or low-slope roofs, we may recommend standing seam panels instead.

Our Screw Down Panel Installation Process

1. Inspection & Planning
   We check your roof pitch, decking condition, and local code requirements.

2. Underlayment Installation
   We apply a high-temp synthetic underlayment to protect against condensation and leaks.

3. Panel Layout & Fastening
   Panels are installed with precise fastener spacing and foam closures for a weather-tight fit.

4. Trims & Flashing
   We finish off with proper ridge caps, pipe boots, sidewall and valley flashing—meeting all IRC 2021 code specs.

Areas We Serve in Georgia

We install screw down panels in:

• Atlanta

• Macon

• Savannah

• Augusta

• Columbus

• Warner Robins

• Sandy Springs

• Johns Creek

• Roswell

• Athens

FAQ

💬 Are screw down metal panels loud in the rain?

Not if installed properly. With insulation and solid decking, noise is usually not a concern.

💬 How often do I need to check the fasteners?

We recommend a fastener inspection every 10–15 years to tighten or replace any that have backed out.

💬 Can screw down panels be installed over shingles?

Yes, if there’s only one layer of shingles and the decking is solid. We’ll inspect and confirm compliance.

💬 Do screw down panels rust?

Not with the right material. We use Galvalume or painted steel that resists rust in Georgia’s humid climate.

Get a Durable Metal Roof for Less with Roof Nuts GA

Whether you're replacing shingles or building a new outbuilding, Jay Bradley and Blake Williamson at Roof Nuts GA can install a screw down panel roof that performs and looks great—without the high price tag.

📞 Call 404-476-6851 or request your free quote at https://RoofNutsGA.com